2 open source boards using the MCP6001T-I/LT

Real designs built with the MCP6001T-I/LT, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

2 boardsClear filters|Most starred

The MCP6001T-I/LT in open source designs

The gallery holds 2 open source boards using the MCP6001T-I/LT from 2 GitHub repositories; a typical one measures about 39.5 × 67.5 mm and carries around 121 components.

100% use four copper layers or more, and 100% carry an open source license.

The most starred is VCU by olin-electric-motorsports.

Microcontrollers on boards using the MCP6001T-I/LT

MCP6001T-I/LT: common questions

Where can I find a MCP6001T-I/LT reference design?

Each of the 2 boards on this page is a real design using the MCP6001T-I/LT. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the MCP6001T-I/LT use?

Most are built on ESP32 (1) and STM32 (1).

How big is a typical board using the MCP6001T-I/LT?

The median is 39.5 × 67.5 mm, and 0% are two-layer designs.

What is the most popular open source board using the MCP6001T-I/LT?

By GitHub stars, VCU by olin-electric-motorsports, with 13 stars.

Can I simulate one of these boards using the MCP6001T-I/LT before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part