5 open source boards using the MCP73113_4
Real designs built with the MCP73113_4, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32Panel
embeddedalpha
99.7 × 108 mm94 partsMIT75
STM32ArmTrax
93.6 × 32 mm92 partsMIT75
STM32ArmTrax OG
93.6 × 32 mm92 partsMIT75
Backup
34.8 × 30 mm54 parts2LMIT75
Battery Charger
34.8 × 30 mm54 parts2LMIT75
The MCP73113_4 in open source designs
The gallery holds 5 open source boards using the MCP73113_4 from 1 GitHub repository; a typical one measures about 93.6 × 32 mm and carries around 92 components.
100% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.
The most starred is Panel by embeddedalpha.
Microcontrollers on boards using the MCP73113_4
What boards using the MCP73113_4 are built for
MCP73113_4: common questions
Where can I find a MCP73113_4 reference design?
Each of the 5 boards on this page is a real design using the MCP73113_4. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the MCP73113_4 use?
Most are built on STM32 (3).
How big is a typical board using the MCP73113_4?
The median is 93.6 × 32 mm, and 100% are two-layer designs.
What is the most popular open source board using the MCP73113_4?
By GitHub stars, Panel by embeddedalpha, with 75 stars.
Can I simulate one of these boards using the MCP73113_4 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.