2 open source boards using the MLD-TF PUSH-H18

Real designs built with the MLD-TF PUSH-H18, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

2 boardsClear filters|Most starred

The MLD-TF PUSH-H18 in open source designs

The gallery holds 2 open source boards using the MLD-TF PUSH-H18 from 2 GitHub repositories; a typical one measures about 80 × 105.5 mm and carries around 980 components.

50% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.

The most starred is LZ-1-Backplane by HynixCJR.

Microcontrollers on boards using the MLD-TF PUSH-H18

What boards using the MLD-TF PUSH-H18 are built for

MLD-TF PUSH-H18: common questions

Where can I find a MLD-TF PUSH-H18 reference design?

Each of the 2 boards on this page is a real design using the MLD-TF PUSH-H18. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the MLD-TF PUSH-H18 use?

Most are built on PIC (1) and RP2040/RP2350 (1).

How big is a typical board using the MLD-TF PUSH-H18?

The median is 80 × 105.5 mm, and 50% are two-layer designs.

What is the most popular open source board using the MLD-TF PUSH-H18?

By GitHub stars, LZ-1-Backplane by HynixCJR, with 1 stars.

Can I simulate one of these boards using the MLD-TF PUSH-H18 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part