2 open source boards using the MT29F2G01ABAGDWB-IT
Real designs built with the MT29F2G01ABAGDWB-IT, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
3d printer
Angelo13C
102 × 102 mm91 parts4LNo license2RP2040/RP2350
Tc2-main
TheCacophonyProject
73 × 75.5 mm161 parts6LCERN-OHL-W-2.00
The MT29F2G01ABAGDWB-IT in open source designs
The gallery holds 2 open source boards using the MT29F2G01ABAGDWB-IT from 2 GitHub repositories; a typical one measures about 87.5 × 88.8 mm and carries around 126 components.
100% use four copper layers or more, and 50% carry an open source license.
The most starred is 3d printer by Angelo13C.
Microcontrollers on boards using the MT29F2G01ABAGDWB-IT
MT29F2G01ABAGDWB-IT: common questions
Where can I find a MT29F2G01ABAGDWB-IT reference design?
Each of the 2 boards on this page is a real design using the MT29F2G01ABAGDWB-IT. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the MT29F2G01ABAGDWB-IT use?
Most are built on ESP32 (1) and RP2040/RP2350 (1).
How big is a typical board using the MT29F2G01ABAGDWB-IT?
The median is 87.5 × 88.8 mm, and 0% are two-layer designs.
What is the most popular open source board using the MT29F2G01ABAGDWB-IT?
By GitHub stars, 3d printer by Angelo13C, with 2 stars.
Can I simulate one of these boards using the MT29F2G01ABAGDWB-IT before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.