4 open source boards using the MT3608/SDB628
Real designs built with the MT3608/SDB628, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32TSAL G V4 2
HKUST-Red-Bird-Racing-EVRT
140 × 60 mm117 parts2LNo license3
ESP32VCU V3
114 × 95 mm90 parts2LNo license3
ESP32Front dash unit
101 × 63 mm56 parts2LNo license3
ESP32Vehicle Control Unit VCU V1
80 × 66.7 mm54 parts2LNo license3
The MT3608/SDB628 in open source designs
The gallery holds 4 open source boards using the MT3608/SDB628 from 1 GitHub repository; a typical one measures about 107.5 × 64.8 mm and carries around 73 components.
100% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.
The most starred is TSAL G V4 2 by HKUST-Red-Bird-Racing-EVRT.
Microcontrollers on boards using the MT3608/SDB628
MT3608/SDB628: common questions
Where can I find a MT3608/SDB628 reference design?
Each of the 4 boards on this page is a real design using the MT3608/SDB628. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the MT3608/SDB628 use?
Most are built on ESP32 (4).
How big is a typical board using the MT3608/SDB628?
The median is 107.5 × 64.8 mm, and 100% are two-layer designs.
What is the most popular open source board using the MT3608/SDB628?
By GitHub stars, TSAL G V4 2 by HKUST-Red-Bird-Racing-EVRT, with 3 stars.
Can I simulate one of these boards using the MT3608/SDB628 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.