5 open source boards using the NJU72501_MODULE
Real designs built with the NJU72501_MODULE, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32ESP32
Tomoshibi-technology
150 × 150 mm224 parts2LMIT0
STM32Common Control
110 × 120 mm219 parts2LMIT0
STM32Main
110 × 120 mm200 parts2LMIT0
STM32BLDC Ver1
131.6 × 167 mm165 parts2LMIT0
STM32Motordriver
125 × 70 mm131 parts2LMIT0
The NJU72501_MODULE in open source designs
The gallery holds 5 open source boards using the NJU72501_MODULE from 1 GitHub repository; a typical one measures about 125 × 120 mm and carries around 200 components.
100% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.
The most starred is ESP32 by Tomoshibi-technology.
What boards using the NJU72501_MODULE are built for
NJU72501_MODULE: common questions
Where can I find a NJU72501_MODULE reference design?
Each of the 5 boards on this page is a real design using the NJU72501_MODULE. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the NJU72501_MODULE use?
Most are built on STM32 (4) and ESP32 (1).
How big is a typical board using the NJU72501_MODULE?
The median is 125 × 120 mm, and 100% are two-layer designs.
What is the most popular open source board using the NJU72501_MODULE?
By GitHub stars, ESP32 by Tomoshibi-technology, with 0 stars.
Can I simulate one of these boards using the NJU72501_MODULE before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.