3 open source boards using the OPA196xDBV

Real designs built with the OPA196xDBV, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

3 boardsClear filters|Most starred

The OPA196xDBV in open source designs

The gallery holds 3 open source boards using the OPA196xDBV from 2 GitHub repositories; a typical one measures about 164.4 × 89.5 mm and carries around 377 components.

67% use four copper layers or more, and 33% carry an open source license.

The most starred is Analog i by deimoscontrols.

Microcontrollers on boards using the OPA196xDBV

What boards using the OPA196xDBV are built for

OPA196xDBV: common questions

Where can I find a OPA196xDBV reference design?

Each of the 3 boards on this page is a real design using the OPA196xDBV. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the OPA196xDBV use?

Most are built on Nordic nRF (1) and STM32 (1).

How big is a typical board using the OPA196xDBV?

The median is 164.4 × 89.5 mm, and 33% are two-layer designs.

What is the most popular open source board using the OPA196xDBV?

By GitHub stars, Analog i by deimoscontrols, with 43 stars.

Can I simulate one of these boards using the OPA196xDBV before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part