2 open source boards using the OPA2134UA/2K5

Real designs built with the OPA2134UA/2K5, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

2 boardsClear filters|Most starred

The OPA2134UA/2K5 in open source designs

The gallery holds 2 open source boards using the OPA2134UA/2K5 from 2 GitHub repositories; a typical one measures about 63.5 × 39.7 mm and carries around 62 components.

50% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.

The most starred is Phase shift PCB by hiroglyph22.

Microcontrollers on boards using the OPA2134UA/2K5

OPA2134UA/2K5: common questions

Where can I find a OPA2134UA/2K5 reference design?

Each of the 2 boards on this page is a real design using the OPA2134UA/2K5. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the OPA2134UA/2K5 use?

Most are built on AVR/Arduino (1).

How big is a typical board using the OPA2134UA/2K5?

The median is 63.5 × 39.7 mm, and 50% are two-layer designs.

What is the most popular open source board using the OPA2134UA/2K5?

By GitHub stars, Phase shift PCB by hiroglyph22, with 1 stars.

Can I simulate one of these boards using the OPA2134UA/2K5 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part