3 open source boards using the OPA380AID
Real designs built with the OPA380AID, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
Vivonics bench
physiii
173 × 61.1 mm175 parts4LNo license0ESP32
SEWCS Commercial v1
Aru123321
115 × 80 mm50 parts2LNo license0- schematic only · 28 partsRaspberry Pi
SEWCS
Aru123321
28 parts2LNo license0
The OPA380AID in open source designs
The gallery holds 3 open source boards using the OPA380AID from 2 GitHub repositories; a typical one measures about 144 × 70.6 mm and carries around 50 components.
67% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.
The most starred is Vivonics bench by physiii.
Microcontrollers on boards using the OPA380AID
OPA380AID: common questions
Where can I find a OPA380AID reference design?
Each of the 3 boards on this page is a real design using the OPA380AID. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the OPA380AID use?
Most are built on ESP32 (2) and Raspberry Pi (1).
How big is a typical board using the OPA380AID?
The median is 144 × 70.6 mm, and 67% are two-layer designs.
What is the most popular open source board using the OPA380AID?
By GitHub stars, Vivonics bench by physiii, with 0 stars.
Can I simulate one of these boards using the OPA380AID before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.