5 open source boards using the OPA4192IDR

Real designs built with the OPA4192IDR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

5 boardsClear filters|Most starred

How designs wire the OPA4192IDR

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the OPA4192IDR connects to, and the resistors, capacitors and other passives placed on it.

  • The OUT pins have a series resistor on 5 of 5 designs, most often 10 kΩ (then 40 kΩ).
  • The IN- pins have a series resistor on 5 of 5 designs, most often 10 kΩ (then 40 kΩ).
  • The IN- pins have a resistor to GND on 3 of 5 designs, most often 10 kΩ.
  • The IN+ pins have a series resistor on 3 of 5 designs, most often 10 kΩ (then 15 kΩ).
OUTpin 1, 7, 8, 14Connected to: A connector 60%
  • Series resistor on 100% · 10 kΩ (9), 40 kΩ (4), 1 kΩ (2)
IN-pin 2, 6, 9, 13Connected to: Signal 100%
  • Series resistor on 100% · 10 kΩ (14), 40 kΩ (4), 100 kΩ (2)
  • Resistor to GND on 60% · 10 kΩ (9)
IN+pin 3, 5, 10, 12Connected to: DAC8568ICPW 40%
  • Series resistor on 60% · 10 kΩ (4), 15 kΩ (1), 1 kΩ (1)
  • Resistor to GND on 40% · 40 kΩ (4), 10 kΩ (1)
V+pin 4Connected to: 12V 100%
  • Decoupling capacitor on 60% · 100 nF (2), 1 µF (1)
V-pin 11Connected to: -5V 60% · GND 40%

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Arpeggiator by EwoudVV, Opensens by genji0306, Universal io board by alexspur and Universal io board by alexspur.

The OPA4192IDR in open source designs

The gallery holds 5 open source boards using the OPA4192IDR from 5 GitHub repositories; a typical one measures about 211.2 × 122.4 mm and carries around 129 components.

80% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.

The most starred is Arpeggiator by EwoudVV.

Microcontrollers on boards using the OPA4192IDR

What boards using the OPA4192IDR are built for

OPA4192IDR: common questions

Where can I find a OPA4192IDR reference design?

Each of the 5 boards on this page is a real design using the OPA4192IDR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What resistor goes on the OPA4192IDR OUT pin?

The OUT pins have a series resistor on 5 of 5 designs, most often 10 kΩ (then 40 kΩ). Counted from the KiCad layouts of 5 open source designs using the OPA4192IDR.

What resistor goes on the OPA4192IDR IN- pin?

The IN- pins have a series resistor on 5 of 5 designs, most often 10 kΩ (then 40 kΩ). Counted from the KiCad layouts of 5 open source designs using the OPA4192IDR.

What resistor goes on the OPA4192IDR IN+ pin?

The IN+ pins have a series resistor on 3 of 5 designs, most often 10 kΩ (then 15 kΩ). Counted from the KiCad layouts of 5 open source designs using the OPA4192IDR.

What parts are used alongside the OPA4192IDR?

The ADS1256IDBT, AMS1117-3.3, DAC8568ICPW, R-78E5.0-1.0 and REF5050IDGK appear in the most repositories here.

Which microcontrollers do boards using the OPA4192IDR use?

Most are built on PIC (1).

How big is a typical board using the OPA4192IDR?

The median is 211.2 × 122.4 mm, and 80% are two-layer designs.

What is the most popular open source board using the OPA4192IDR?

By GitHub stars, Arpeggiator by EwoudVV, with 1 stars.

Can I simulate one of these boards using the OPA4192IDR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part