3 open source boards using the OPA830
Real designs built with the OPA830, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350
ADC pHAT AFE
kelu124
65 × 30 mm61 parts2LTAPR-OHL-1.01Input board
robmacl
270 × 100 mm384 parts4LNo license0RP2040/RP2350
ADC pHAT AFE ADC10080
kelu124
65 × 30 mm59 parts2LTAPR-OHL-1.01
The OPA830 in open source designs
The gallery holds 3 open source boards using the OPA830 from 2 GitHub repositories; a typical one measures about 65 × 30 mm and carries around 61 components.
67% are two-layer designs, the rest use four layers or more, and 67% carry an open source license.
The most starred is ADC pHAT AFE by kelu124.
Microcontrollers on boards using the OPA830
What boards using the OPA830 are built for
OPA830: common questions
Where can I find a OPA830 reference design?
Each of the 3 boards on this page is a real design using the OPA830. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the OPA830 use?
Most are built on RP2040/RP2350 (2).
How big is a typical board using the OPA830?
The median is 65 × 30 mm, and 67% are two-layer designs.
What is the most popular open source board using the OPA830?
By GitHub stars, ADC pHAT AFE by kelu124, with 1 stars.
Can I simulate one of these boards using the OPA830 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.