1 open source board using the PAC1954T-E/J6CX
Real designs built with the PAC1954T-E/J6CX, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
greatscottgadgetsThe PAC1954T-E/J6CX in open source designs
The gallery holds 1 open source boards using the PAC1954T-E/J6CX from 1 GitHub repository; a typical one measures about 74 × 85 mm and carries around 109 components.
100% use four copper layers or more, and 100% carry an open source license.
The most starred is Vbus switch by greatscottgadgets.
PAC1954T-E/J6CX: common questions
Where can I find a PAC1954T-E/J6CX reference design?
Each of the 1 boards on this page is a real design using the PAC1954T-E/J6CX. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How big is a typical board using the PAC1954T-E/J6CX?
The median is 74 × 85 mm, and 0% are two-layer designs.
What is the most popular open source board using the PAC1954T-E/J6CX?
By GitHub stars, Vbus switch by greatscottgadgets, with 21 stars.
Can I simulate one of these boards using the PAC1954T-E/J6CX before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.