7 open source boards using the PAM2401
Real designs built with the PAM2401, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
NXP
TouchDrum
JoelEB
100 × 100 mm140 parts4LNo license0Boostboard1
nemocazin
15.2 × 15.2 mm13 parts2LMIT0Boostboard1
BitDogLab-Escola4-0
15.2 × 15.2 mm13 parts2LNo license2Boostboard1
8076ducc
15.2 × 15.2 mm13 parts2LNo license1DS Special Object
JoelEB
59.9 × 59.9 mm29 parts2LNo license0Boostboard1
hobsonbreno
15.2 × 15.2 mm13 parts2LCERN-OHL-S-2.00Boostboard1
LuanaaRuteeee
15.2 × 15.2 mm13 parts2LCERN-OHL-S-2.00
How designs wire the PAM2401
Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the PAM2401 connects to, and the resistors, capacitors and other passives placed on it.
- Pin 3 has a decoupling capacitor on 6 of 6 designs, most often 22 µF (then 10 µF).
- Pin 5 has a pull-up to VCC on 6 of 6 designs, most often 750 kΩ.
- Pin 5 has a resistor to GND on 6 of 6 designs, most often 100 kΩ.
- Pin 7 has a decoupling capacitor on 6 of 6 designs, most often 22 µF.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| Pin 1 | Connected to: Signal 100% |
|
| Pin 2 | Connected to: A connector 83% |
|
| Pin 3 | Connected to: VBATT 83% · a signal 17% |
|
| Pin 4 | Connected to: GND 100% | — |
| Pin 5 | Connected to: Signal 100% |
|
| Pin 6 | Connected to: Signal 83% · not connected 17% |
|
| Pin 7 | Connected to: VCC 100% |
|
| Pin 8 | Connected to: GND 100% | — |
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Boostboard1 by BitDogLab-Escola4-0, Boostboard1 by 8076ducc, Boostboard1 by hobsonbreno and DS Special Object by JoelEB.
The PAM2401 in open source designs
The gallery holds 7 open source boards using the PAM2401 from 6 GitHub repositories; a typical one measures about 15.2 × 15.2 mm and carries around 13 components.
86% are two-layer designs, the rest use four layers or more, and 43% carry an open source license.
The most starred is Boostboard1 by BitDogLab-Escola4-0.
Microcontrollers on boards using the PAM2401
What boards using the PAM2401 are built for
PAM2401: common questions
Where can I find a PAM2401 reference design?
Each of the 7 boards on this page is a real design using the PAM2401. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the PAM2401 pin 3?
Pin 3 has a decoupling capacitor on 6 of 6 designs, most often 22 µF (then 10 µF). Counted from the KiCad layouts of 6 open source designs using the PAM2401.
What pull-up resistor is used on the PAM2401 pin 5?
Pin 5 has a pull-up to VCC on 6 of 6 designs, most often 750 kΩ. Counted from the KiCad layouts of 6 open source designs using the PAM2401.
What decoupling capacitors do designs use on the PAM2401 pin 7?
Pin 7 has a decoupling capacitor on 6 of 6 designs, most often 22 µF. Counted from the KiCad layouts of 6 open source designs using the PAM2401.
Which microcontrollers do boards using the PAM2401 use?
Most are built on NXP (1).
How big is a typical board using the PAM2401?
The median is 15.2 × 15.2 mm, and 86% are two-layer designs.
What is the most popular open source board using the PAM2401?
By GitHub stars, Boostboard1 by BitDogLab-Escola4-0, with 2 stars.
Can I simulate one of these boards using the PAM2401 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.