1 open source board using the PVG612S
Real designs built with the PVG612S, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
jbilanderThe PVG612S in open source designs
The gallery holds 1 open source boards using the PVG612S from 1 GitHub repository; a typical one measures about 55 × 59 mm and carries around 18 components.
100% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.
The most starred is Sdbox by jbilander.
Microcontrollers on boards using the PVG612S
What boards using the PVG612S are built for
PVG612S: common questions
Where can I find a PVG612S reference design?
Each of the 1 boards on this page is a real design using the PVG612S. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the PVG612S use?
Most are built on AVR/Arduino (1).
How big is a typical board using the PVG612S?
The median is 55 × 59 mm, and 100% are two-layer designs.
What is the most popular open source board using the PVG612S?
By GitHub stars, Sdbox by jbilander, with 108 stars.
Can I simulate one of these boards using the PVG612S before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.