6 open source boards using the RF430CL330HIRGTR
Real designs built with the RF430CL330HIRGTR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
D4 small
unsurv
32 × 45 mm53 parts4LGPL-3.073ESP32
D4 small pcb panel
unsurv
83 × 109 mm53 parts4LGPL-3.073AVR/Arduino
Nfc sense
unsurv
18.6 × 43.2 mm16 parts4LNo license49AVR/Arduino
Nfc sense panel
unsurv
121 × 105.3 mm16 parts4LNo license49AVR/Arduino
Nfc sense coin
unsurv
23.3 × 26.4 mm15 parts4LNo license49AVR/Arduino
Pocket knife sense
unsurv
14.8 × 38.8 mm15 parts4LNo license49
The RF430CL330HIRGTR in open source designs
The gallery holds 6 open source boards using the RF430CL330HIRGTR from 2 GitHub repositories; a typical one measures about 27.6 × 44.1 mm and carries around 16 components.
100% use four copper layers or more, and 33% carry an open source license.
The most starred is D4 small pcb by unsurv.
Microcontrollers on boards using the RF430CL330HIRGTR
What boards using the RF430CL330HIRGTR are built for
RF430CL330HIRGTR: common questions
Where can I find a RF430CL330HIRGTR reference design?
Each of the 6 boards on this page is a real design using the RF430CL330HIRGTR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the RF430CL330HIRGTR use?
Most are built on AVR/Arduino (4) and ESP32 (2).
How big is a typical board using the RF430CL330HIRGTR?
The median is 27.6 × 44.1 mm, and 0% are two-layer designs.
What is the most popular open source board using the RF430CL330HIRGTR?
By GitHub stars, D4 small pcb by unsurv, with 73 stars.
Can I simulate one of these boards using the RF430CL330HIRGTR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.