3 open source boards using the RN42

Real designs built with the RN42, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

3 boardsClear filters|Most starred

The RN42 in open source designs

The gallery holds 3 open source boards using the RN42 from 3 GitHub repositories; a typical one measures about 102.5 × 41.9 mm and carries around 57 components.

100% are two-layer designs, the rest use four layers or more, and 33% carry an open source license.

The most starred is HHKB controller by tmk.

Microcontrollers on boards using the RN42

What boards using the RN42 are built for

RN42: common questions

Where can I find a RN42 reference design?

Each of the 3 boards on this page is a real design using the RN42. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the RN42 use?

Most are built on AVR/Arduino (2).

How big is a typical board using the RN42?

The median is 102.5 × 41.9 mm, and 100% are two-layer designs.

What is the most popular open source board using the RN42?

By GitHub stars, HHKB controller by tmk, with 260 stars.

Can I simulate one of these boards using the RN42 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part