3 open source boards using the SE050

Real designs built with the SE050, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

3 boardsClear filters|Most starred

The SE050 in open source designs

The gallery holds 3 open source boards using the SE050 from 3 GitHub repositories; a typical one measures about 55.6 × 19.6 mm and carries around 180 components.

100% use four copper layers or more, and 67% carry an open source license.

The most starred is USB armory Mk II by usbarmory.

Microcontrollers on boards using the SE050

SE050: common questions

Where can I find a SE050 reference design?

Each of the 3 boards on this page is a real design using the SE050. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the SE050 use?

Most are built on Nordic nRF (1) and STM32 (1).

How big is a typical board using the SE050?

The median is 55.6 × 19.6 mm, and 0% are two-layer designs.

What is the most popular open source board using the SE050?

By GitHub stars, USB armory Mk II by usbarmory, with 1,498 stars.

Can I simulate one of these boards using the SE050 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part