5 open source boards using the SIC477ED-T1-GE3
Real designs built with the SIC477ED-T1-GE3, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Oculink pcie adapter
antmicro
58 × 135 mm127 parts4LApache-2.020
STM32V1.3
PranavNedunghat
66 × 8.8 mm475 parts8LApache-2.00
STM32V1.1 version control
66 × 8.8 mm473 parts8LApache-2.00
STM32V1.1 XT30 version
4.5 × 57.9 mm473 parts8LApache-2.00
STM32V1.2
66 × 8.8 mm471 parts8LApache-2.00
The SIC477ED-T1-GE3 in open source designs
The gallery holds 5 open source boards using the SIC477ED-T1-GE3 from 2 GitHub repositories; a typical one measures about 66 × 8.8 mm and carries around 473 components.
100% use four copper layers or more, and 100% carry an open source license.
The most starred is Oculink pcie adapter by antmicro.
Microcontrollers on boards using the SIC477ED-T1-GE3
What boards using the SIC477ED-T1-GE3 are built for
SIC477ED-T1-GE3: common questions
Where can I find a SIC477ED-T1-GE3 reference design?
Each of the 5 boards on this page is a real design using the SIC477ED-T1-GE3. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the SIC477ED-T1-GE3 use?
Most are built on STM32 (4).
How big is a typical board using the SIC477ED-T1-GE3?
The median is 66 × 8.8 mm, and 0% are two-layer designs.
What is the most popular open source board using the SIC477ED-T1-GE3?
By GitHub stars, Oculink pcie adapter by antmicro, with 20 stars.
Can I simulate one of these boards using the SIC477ED-T1-GE3 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.