2 open source boards using the SN74LVC1G125DCK
Real designs built with the SN74LVC1G125DCK, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
HFLink
LX050724
48.5 × 33.5 mm111 parts4LApache-2.024Microchip SAM
Atmel sam3x8
JGilcreast
137.5 × 58.5 mm99 parts2LNo license0
The SN74LVC1G125DCK in open source designs
The gallery holds 2 open source boards using the SN74LVC1G125DCK from 2 GitHub repositories; a typical one measures about 93 × 46 mm and carries around 105 components.
50% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.
The most starred is HFLink by LX050724.
Microcontrollers on boards using the SN74LVC1G125DCK
SN74LVC1G125DCK: common questions
Where can I find a SN74LVC1G125DCK reference design?
Each of the 2 boards on this page is a real design using the SN74LVC1G125DCK. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the SN74LVC1G125DCK use?
Most are built on Microchip SAM (1).
How big is a typical board using the SN74LVC1G125DCK?
The median is 93 × 46 mm, and 50% are two-layer designs.
What is the most popular open source board using the SN74LVC1G125DCK?
By GitHub stars, HFLink by LX050724, with 24 stars.
Can I simulate one of these boards using the SN74LVC1G125DCK before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.