13 open source boards using the SN74LVC1G132DBVR

Real designs built with the SN74LVC1G132DBVR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

13 boardsClear filters|Most starred

The SN74LVC1G132DBVR in open source designs

The gallery holds 13 open source boards using the SN74LVC1G132DBVR from 2 GitHub repositories; a typical one measures about 86 × 145 mm and carries around 197 components.

100% use four copper layers or more, and 0% carry an open source license.

The most starred is Fixture import NOT FOR FABRICATION by JCastel358.

Microcontrollers on boards using the SN74LVC1G132DBVR

What boards using the SN74LVC1G132DBVR are built for

SN74LVC1G132DBVR: common questions

Where can I find a SN74LVC1G132DBVR reference design?

Each of the 13 boards on this page is a real design using the SN74LVC1G132DBVR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the SN74LVC1G132DBVR use?

Most are built on ESP32 (1).

How big is a typical board using the SN74LVC1G132DBVR?

The median is 86 × 145 mm, and 0% are two-layer designs.

What is the most popular open source board using the SN74LVC1G132DBVR?

By GitHub stars, Fixture import NOT FOR FABRICATION by JCastel358, with 1 stars.

Can I simulate one of these boards using the SN74LVC1G132DBVR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part