6 open source boards using the TAS5825MRHB

Real designs built with the TAS5825MRHB, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

6 boardsClear filters|Most starred

The TAS5825MRHB in open source designs

The gallery holds 6 open source boards using the TAS5825MRHB from 4 GitHub repositories; a typical one measures about 114.5 × 94 mm and carries around 58 components.

50% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.

The most starred is OtterCastAmp by Ottercast.

Microcontrollers on boards using the TAS5825MRHB

What boards using the TAS5825MRHB are built for

TAS5825MRHB: common questions

Where can I find a TAS5825MRHB reference design?

Each of the 6 boards on this page is a real design using the TAS5825MRHB. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the TAS5825MRHB use?

Most are built on ESP32 (1) and Raspberry Pi (1).

How big is a typical board using the TAS5825MRHB?

The median is 114.5 × 94 mm, and 50% are two-layer designs.

What is the most popular open source board using the TAS5825MRHB?

By GitHub stars, OtterCastAmp by Ottercast, with 341 stars.

Can I simulate one of these boards using the TAS5825MRHB before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part