1 open source board using the TJA1021T/20/CM,118
Real designs built with the TJA1021T/20/CM,118, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
avlyubimovThe TJA1021T/20/CM,118 in open source designs
The gallery holds 1 open source boards using the TJA1021T/20/CM,118 from 1 GitHub repository; a typical one measures about 100 × 70 mm and carries around 99 components.
100% use four copper layers or more, and 0% carry an open source license.
The most starred is LB-100 by avlyubimov.
Microcontrollers on boards using the TJA1021T/20/CM,118
TJA1021T/20/CM,118: common questions
Where can I find a TJA1021T/20/CM,118 reference design?
Each of the 1 boards on this page is a real design using the TJA1021T/20/CM,118. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the TJA1021T/20/CM,118 use?
Most are built on STM32 (1).
How big is a typical board using the TJA1021T/20/CM,118?
The median is 100 × 70 mm, and 0% are two-layer designs.
What is the most popular open source board using the TJA1021T/20/CM,118?
By GitHub stars, LB-100 by avlyubimov, with 1 stars.
Can I simulate one of these boards using the TJA1021T/20/CM,118 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.