6 open source boards using the TLC555xP
Real designs built with the TLC555xP, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Dice of god
navthings
125 × 58 mm42 parts2LNo license1GikFun-LED-Chaser-RE
SmoothBraneIndustries
89 × 105 mm138 parts2LNo license0AS2650 board
AvalonSemiconductors
96.9 × 67.9 mm76 parts4LApache-2.00Door alarm
RoiCorporation
49.5 × 85.5 mm16 parts2LMIT0COMS3930
Kysariin
84.2 × 74.9 mm8 parts2LNo license0Creative embedded system
luluwangyy
72.5 × 58.9 mm8 parts2LNo license0
How designs wire the TLC555xP
Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the TLC555xP connects to, and the resistors, capacitors and other passives placed on it.
- The CV pin has a capacitor to GND on 5 of 6 designs, most often 10 nF (then 100 nF).
- The THR pin has a capacitor to GND on 5 of 6 designs, most often 10 µF (then 10 nF).
- The Q pin has a series resistor on 4 of 6 designs, most often 180 Ω (then 100 Ω).
- The DIS pin has a series resistor on 4 of 6 designs, most often 12 kΩ (then 10 kΩ).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 1 | Connected to: GND 83% · a signal 17% | — |
| TRpin 2 | Connected to: Signal 100% |
|
| Qpin 3 | Connected to: Signal 100% |
|
| Rpin 4 | Connected to: 3V 67% · a signal 33% | — |
| CVpin 5 | Connected to: Signal 83% · not connected 17% |
|
| THRpin 6 | Connected to: Signal 100% |
|
| DISpin 7 | Connected to: Signal 100% |
|
| VCCpin 8 | Connected to: 3V 67% · a signal 33% | — |
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Dice of god by navthings, AS2650 board by AvalonSemiconductors, COMS3930 PCB by Kysariin and Creative embedded system pcb by luluwangyy.
The TLC555xP in open source designs
The gallery holds 6 open source boards using the TLC555xP from 6 GitHub repositories; a typical one measures about 86.6 × 71.4 mm and carries around 29 components.
83% are two-layer designs, the rest use four layers or more, and 33% carry an open source license.
The most starred is Dice of god by navthings.
TLC555xP: common questions
Where can I find a TLC555xP reference design?
Each of the 6 boards on this page is a real design using the TLC555xP. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the TLC555xP CV pin connected?
The CV pin has a capacitor to GND on 5 of 6 designs, most often 10 nF (then 100 nF). Counted from the KiCad layouts of 6 open source designs using the TLC555xP.
How is the TLC555xP THR pin connected?
The THR pin has a capacitor to GND on 5 of 6 designs, most often 10 µF (then 10 nF). Counted from the KiCad layouts of 6 open source designs using the TLC555xP.
What resistor goes on the TLC555xP Q pin?
The Q pin has a series resistor on 4 of 6 designs, most often 180 Ω (then 100 Ω). Counted from the KiCad layouts of 6 open source designs using the TLC555xP.
How big is a typical board using the TLC555xP?
The median is 86.6 × 71.4 mm, and 83% are two-layer designs.
What is the most popular open source board using the TLC555xP?
By GitHub stars, Dice of god by navthings, with 1 stars.
Can I simulate one of these boards using the TLC555xP before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.