4 open source boards using the TLP152
Real designs built with the TLP152, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Nucleo-F767-Base-Board
Entruer
120 × 130 mm76 parts2LNo license0
PICTouch-LED-controller
elect-gombe
100 × 49.9 mm60 parts2LNo license0
Gate Driver TLP152
MUBARIS-KT
40 × 24 mm44 parts2LNo license0
Driving power board 2024 TX30 S ver1.0
boiled-mackerel
91 × 55 mm35 parts2LNo license0
The TLP152 in open source designs
The gallery holds 4 open source boards using the TLP152 from 4 GitHub repositories; a typical one measures about 95.5 × 52.4 mm and carries around 52 components.
100% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.
The most starred is Nucleo-F767-Base-Board by Entruer.
Microcontrollers on boards using the TLP152
TLP152: common questions
Where can I find a TLP152 reference design?
Each of the 4 boards on this page is a real design using the TLP152. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the TLP152 use?
Most are built on PIC (1).
How big is a typical board using the TLP152?
The median is 95.5 × 52.4 mm, and 100% are two-layer designs.
What is the most popular open source board using the TLP152?
By GitHub stars, Nucleo-F767-Base-Board by Entruer, with 0 stars.
Can I simulate one of these boards using the TLP152 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.