3 open source boards using the TPD4E05U06
Real designs built with the TPD4E05U06, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
USB armory Mk II
usbarmory
55.6 × 19.6 mm180 partsNo license1.5kRP2040/RP2350
IjrX1Core
OpenNoorIlm
320 × 255 mm246 parts4LMIT0FPGA
Accelerator devkit
retraux-design
50 × 42 mm160 parts6LApache-2.00
The TPD4E05U06 in open source designs
The gallery holds 3 open source boards using the TPD4E05U06 from 3 GitHub repositories; a typical one measures about 55.6 × 42 mm and carries around 180 components.
100% use four copper layers or more, and 67% carry an open source license.
The most starred is USB armory Mk II by usbarmory.
Microcontrollers on boards using the TPD4E05U06
TPD4E05U06: common questions
Where can I find a TPD4E05U06 reference design?
Each of the 3 boards on this page is a real design using the TPD4E05U06. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the TPD4E05U06 use?
Most are built on FPGA (1) and RP2040/RP2350 (1).
How big is a typical board using the TPD4E05U06?
The median is 55.6 × 42 mm, and 0% are two-layer designs.
What is the most popular open source board using the TPD4E05U06?
By GitHub stars, USB armory Mk II by usbarmory, with 1,498 stars.
Can I simulate one of these boards using the TPD4E05U06 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.