2 open source boards using the TPS22810DBV

Real designs built with the TPS22810DBV, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

2 boardsClear filters|Most starred

The TPS22810DBV in open source designs

The gallery holds 2 open source boards using the TPS22810DBV from 2 GitHub repositories; a typical one measures about 100 × 100 mm and carries around 112 components.

50% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.

The most starred is Pi TX 35W PA V2 by M0LTE.

Microcontrollers on boards using the TPS22810DBV

What boards using the TPS22810DBV are built for

TPS22810DBV: common questions

Where can I find a TPS22810DBV reference design?

Each of the 2 boards on this page is a real design using the TPS22810DBV. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the TPS22810DBV use?

Most are built on ESP32 (1) and Microchip SAM (1).

How big is a typical board using the TPS22810DBV?

The median is 100 × 100 mm, and 50% are two-layer designs.

What is the most popular open source board using the TPS22810DBV?

By GitHub stars, Pi TX 35W PA V2 by M0LTE, with 15 stars.

Can I simulate one of these boards using the TPS22810DBV before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part