4 open source boards using the VOM1271T

Real designs built with the VOM1271T, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

4 boardsClear filters|Most starred

The VOM1271T in open source designs

The gallery holds 4 open source boards using the VOM1271T from 4 GitHub repositories; a typical one measures about 97.5 × 100 mm and carries around 130 components.

75% use four copper layers or more, and 50% carry an open source license.

The most starred is C245-JBC-control by radioelf.

Microcontrollers on boards using the VOM1271T

What boards using the VOM1271T are built for

VOM1271T: common questions

Where can I find a VOM1271T reference design?

Each of the 4 boards on this page is a real design using the VOM1271T. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the VOM1271T use?

Most are built on STM32 (2), AVR/Arduino (1) and Raspberry Pi (1).

How big is a typical board using the VOM1271T?

The median is 97.5 × 100 mm, and 25% are two-layer designs.

What is the most popular open source board using the VOM1271T?

By GitHub stars, C245-JBC-control by radioelf, with 15 stars.

Can I simulate one of these boards using the VOM1271T before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part