6 open source boards using the YM2413
Real designs built with the YM2413, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Silicon Labs
Ym2413 dev
andete
115 × 45 mm146 parts2LNo license25YN2413 MOTO
dinoflorenzi
61 × 69.9 mm32 parts2LNo license9Daewoo Backslot FMPAC
RBSC
85.4 × 64 mm47 parts2LNo license4Ym2413-stereo isa
kvanderlaag
119.4 × 98.7 mm78 parts2LMIT3RP2040/RP2350
Pico-SMSFM
knight-ryu12
76.1 × 64.1 mm31 parts2LNo license1Silicon Labs
Main
andete
71.9 × 39.3 mm91 parts2LNo license25
How designs wire the YM2413
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the YM2413 connects to, and the resistors, capacitors and other passives placed on it.
- The MO pin has a resistor to GND on 5 of 5 designs, most often 2.2 kΩ.
- The RO pin has a resistor to GND on 5 of 5 designs, most often 2.2 kΩ.
- The MO pin has a series resistor on 4 of 5 designs, most often 4.7 kΩ (then 2.2 kΩ).
- The RO pin has a series resistor on 4 of 5 designs, most often 4.7 kΩ (then 2.2 kΩ).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 1 | Connected to: GND 100% | — |
| XOUTpin 9 | Connected to: Not connected 60% · a signal 40% | — |
| MOpin 14 | Connected to: Signal 100% |
|
| ROpin 15 | Connected to: Signal 100% |
|
| VCCpin 16 | Connected to: 5V 80% · a signal 20% | — |
13 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Main by andete, YN2413 MOTO by dinoflorenzi, Daewoo Backslot FMPAC by RBSC and Ym2413-stereo isa by kvanderlaag.
The YM2413 in open source designs
The gallery holds 6 open source boards using the YM2413 from 5 GitHub repositories; a typical one measures about 80.8 × 64 mm and carries around 63 components.
100% are two-layer designs, the rest use four layers or more, and 17% carry an open source license.
The most starred is Ym2413 dev by andete.
Microcontrollers on boards using the YM2413
YM2413: common questions
Where can I find a YM2413 reference design?
Each of the 6 boards on this page is a real design using the YM2413. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What resistor goes on the YM2413 MO pin?
The MO pin has a resistor to GND on 5 of 5 designs, most often 2.2 kΩ. Counted from the KiCad layouts of 5 open source designs using the YM2413.
What resistor goes on the YM2413 RO pin?
The RO pin has a resistor to GND on 5 of 5 designs, most often 2.2 kΩ. Counted from the KiCad layouts of 5 open source designs using the YM2413.
How is the YM2413 XOUT pin connected?
The XOUT pin is left unconnected on 3 of 5 designs (a signal on 2). Counted from the KiCad layouts of 5 open source designs using the YM2413.
Which microcontrollers do boards using the YM2413 use?
Most are built on Silicon Labs (2) and RP2040/RP2350 (1).
How big is a typical board using the YM2413?
The median is 80.8 × 64 mm, and 100% are two-layer designs.
What is the most popular open source board using the YM2413?
By GitHub stars, Ym2413 dev by andete, with 25 stars.
Can I simulate one of these boards using the YM2413 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.