4 open source boards using the ZXCT1009F

Real designs built with the ZXCT1009F, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

4 boardsClear filters|Most starred

The ZXCT1009F in open source designs

The gallery holds 4 open source boards using the ZXCT1009F from 4 GitHub repositories; a typical one measures about 68.3 × 68 mm and carries around 136 components.

50% are two-layer designs, the rest use four layers or more, and 75% carry an open source license.

The most starred is BECom by rjsc.

Microcontrollers on boards using the ZXCT1009F

What boards using the ZXCT1009F are built for

ZXCT1009F: common questions

Where can I find a ZXCT1009F reference design?

Each of the 4 boards on this page is a real design using the ZXCT1009F. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the ZXCT1009F use?

Most are built on AVR/Arduino (1) and ESP32 (1).

How big is a typical board using the ZXCT1009F?

The median is 68.3 × 68 mm, and 50% are two-layer designs.

What is the most popular open source board using the ZXCT1009F?

By GitHub stars, BECom by rjsc, with 1 stars.

Can I simulate one of these boards using the ZXCT1009F before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part