5 open source boards using the 296-18593-1
Real designs built with the 296-18593-1, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Arena 12-18 s v0
floesche
330.2 × 238.5 mm88 parts2LCC-BY-4.00
Arena 6-inf v0p3
260 × 60 mm34 parts2LCC-BY-4.00
G4 Test Arena National Instruments Connector
260 × 60 mm27 parts4LCC-BY-4.00
NXPG4 Test Arena Teensy 4.1
260 × 80 mm26 parts4LCC-BY-4.00
RP2040/RP2350G4 Test Arena Raspberry Pi Pico
260 × 80 mm24 parts4LCC-BY-4.00
The 296-18593-1 in open source designs
The gallery holds 5 open source boards using the 296-18593-1 from 1 GitHub repository; a typical one measures about 260 × 80 mm and carries around 27 components.
60% use four copper layers or more, and 100% carry an open source license.
The most starred is Arena 12-18 s v0 by floesche.
Microcontrollers on boards using the 296-18593-1
What boards using the 296-18593-1 are built for
296-18593-1: common questions
Where can I find a 296-18593-1 reference design?
Each of the 5 boards on this page is a real design using the 296-18593-1. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the 296-18593-1 use?
Most are built on NXP (1) and RP2040/RP2350 (1).
How big is a typical board using the 296-18593-1?
The median is 260 × 80 mm, and 40% are two-layer designs.
What is the most popular open source board using the 296-18593-1?
By GitHub stars, Arena 12-18 s v0 by floesche, with 0 stars.
Can I simulate one of these boards using the 296-18593-1 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.