1 open source board using the 511-STM32WB55CGU6
Real designs built with the 511-STM32WB55CGU6, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
makeristicThe 511-STM32WB55CGU6 in open source designs
The gallery holds 1 open source boards using the 511-STM32WB55CGU6 from 1 GitHub repository; a typical one measures about 52.5 × 22.9 mm and carries around 43 components.
100% use four copper layers or more, and 0% carry an open source license.
The most starred is Feather STM32WB55 by makeristic.
Microcontrollers on boards using the 511-STM32WB55CGU6
What boards using the 511-STM32WB55CGU6 are built for
511-STM32WB55CGU6: common questions
Where can I find a 511-STM32WB55CGU6 reference design?
Each of the 1 boards on this page is a real design using the 511-STM32WB55CGU6. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the 511-STM32WB55CGU6 use?
Most are built on STM32 (1).
How big is a typical board using the 511-STM32WB55CGU6?
The median is 52.5 × 22.9 mm, and 0% are two-layer designs.
What is the most popular open source board using the 511-STM32WB55CGU6?
By GitHub stars, Feather STM32WB55 by makeristic, with 2 stars.
Can I simulate one of these boards using the 511-STM32WB55CGU6 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.