3 open source boards using the AD725
Real designs built with the AD725, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
MegaAV rev0.5
RIP-Felix
50 × 50 mm143 parts4LCERN-OHL-S-2.047
MegaAV Saturn rev0.2
40.4 × 55 mm133 parts2LCERN-OHL-S-2.047
Sk801-rgb
mirdej
98.5 × 34.6 mm135 parts2LNo license47
The AD725 in open source designs
The gallery holds 3 open source boards using the AD725 from 2 GitHub repositories; a typical one measures about 50 × 50 mm and carries around 135 components.
67% are two-layer designs, the rest use four layers or more, and 67% carry an open source license.
The most starred is MegaAV rev0.5 by RIP-Felix.
What boards using the AD725 are built for
AD725: common questions
Where can I find a AD725 reference design?
Each of the 3 boards on this page is a real design using the AD725. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How big is a typical board using the AD725?
The median is 50 × 50 mm, and 67% are two-layer designs.
What is the most popular open source board using the AD725?
By GitHub stars, MegaAV rev0.5 by RIP-Felix, with 47 stars.
Can I simulate one of these boards using the AD725 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.