HardLabs

9 open source boards using the ADS1115IDGS 0x49

Real designs built with the ADS1115IDGS 0x49, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

9 boardsClear filtersOpen license only|Most starredRecently updatedMost components

The ADS1115IDGS 0x49 in open source designs

The gallery holds 9 open source boards using the ADS1115IDGS 0x49 from 1 GitHub repository; a typical one measures about 155 × 80.6 mm and carries around 104 components.

100% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.

The most starred is Daughterboard before 4layer trace wipe by BoomBoxRobotics.

What boards using the ADS1115IDGS 0x49 are built for

ADS1115IDGS 0x49: common questions

Where can I find a ADS1115IDGS 0x49 reference design?

Each of the 9 boards on this page is a real design using the ADS1115IDGS 0x49. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How big is a typical board using the ADS1115IDGS 0x49?

The median is 155 × 80.6 mm, and 100% are two-layer designs.

What is the most popular open source board using the ADS1115IDGS 0x49?

By GitHub stars, Daughterboard before 4layer trace wipe by BoomBoxRobotics, with 1 stars.

Can I simulate one of these boards using the ADS1115IDGS 0x49 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part

AMS1117-3.3 345USBLC6-2SC6 296RP2040 224W25Q128JVS 135TL072 118CH340C 116AP2112K-3.3 103ESP32-S3-WROOM-1 97TL074 94AP2112K-3.3TRG1 82SRV05-4 73W25Q128JVSIQ 73USBLC6-2P6 70Pico 52L7805 50XC6206P332MR 50MCP73831T-2ACI/OT 49SN65HVD230 49AMS1117-5.0 48ESP32-S3-WROOM-1-N16R8 48LM393 44BME280 43DW01A 43LAN8710A-EZC(QFN32) 43