3 open source boards using the AP2127K-1.2TRG1
Real designs built with the AP2127K-1.2TRG1, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
FPGAICE40-fpga
joshajohnson
50 × 22.9 mm62 parts2LCC-BY-NC-4.026
FPGARAM2GS
garrettsworkshop
67.3 × 48.5 mm62 parts4LCustom license24
7seg dip wing
52 × 22.9 mm9 parts2LCC-BY-NC-4.026
The AP2127K-1.2TRG1 in open source designs
The gallery holds 3 open source boards using the AP2127K-1.2TRG1 from 2 GitHub repositories; a typical one measures about 52 × 22.9 mm and carries around 62 components.
67% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.
The most starred is ICE40-fpga by joshajohnson.
Microcontrollers on boards using the AP2127K-1.2TRG1
What boards using the AP2127K-1.2TRG1 are built for
AP2127K-1.2TRG1: common questions
Where can I find a AP2127K-1.2TRG1 reference design?
Each of the 3 boards on this page is a real design using the AP2127K-1.2TRG1. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the AP2127K-1.2TRG1 use?
Most are built on FPGA (2).
How big is a typical board using the AP2127K-1.2TRG1?
The median is 52 × 22.9 mm, and 67% are two-layer designs.
What is the most popular open source board using the AP2127K-1.2TRG1?
By GitHub stars, ICE40-fpga by joshajohnson, with 26 stars.
Can I simulate one of these boards using the AP2127K-1.2TRG1 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.