9 open source boards using the AP63200WU 5V Buck
Real designs built with the AP63200WU 5V Buck, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Daughterboard before 4layer trace wipe
BoomBoxRobotics
155 × 80.6 mm105 parts2LCC0-1.01
Daughterboard before u1 pin23 neckdown
155 × 80.6 mm105 parts2LCC0-1.01
Daughterboard before 3v3 logic branch
155 × 80.6 mm104 parts2LCC0-1.01
Daughterboard before add j30 5v uart pad
155 × 80.6 mm104 parts2LCC0-1.01
Daughterboard before manual route patch
155 × 80.6 mm104 parts2LCC0-1.01
Daughterboard before power trace widening
155 × 80.6 mm104 parts2LCC0-1.01
Daughterboard before usb j1 net fix
155 × 80.6 mm104 parts2LCC0-1.01
Daughterboard post freerouting before rebalance
155 × 80.6 mm104 parts2LCC0-1.01
Daughterboard power widened experimental has shorts
155 × 80.6 mm104 parts2LCC0-1.01
The AP63200WU 5V Buck in open source designs
The gallery holds 9 open source boards using the AP63200WU 5V Buck from 1 GitHub repository; a typical one measures about 155 × 80.6 mm and carries around 104 components.
100% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.
The most starred is Daughterboard before 4layer trace wipe by BoomBoxRobotics.
What boards using the AP63200WU 5V Buck are built for
AP63200WU 5V Buck: common questions
Where can I find a AP63200WU 5V Buck reference design?
Each of the 9 boards on this page is a real design using the AP63200WU 5V Buck. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How big is a typical board using the AP63200WU 5V Buck?
The median is 155 × 80.6 mm, and 100% are two-layer designs.
What is the most popular open source board using the AP63200WU 5V Buck?
By GitHub stars, Daughterboard before 4layer trace wipe by BoomBoxRobotics, with 1 stars.
Can I simulate one of these boards using the AP63200WU 5V Buck before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.