4 open source boards using the AP7215-33YG-13

Real designs built with the AP7215-33YG-13, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

4 boardsClear filtersOpen license only|Most starred Recently updated Most components

The AP7215-33YG-13 in open source designs

The gallery holds 4 open source boards using the AP7215-33YG-13 from 3 GitHub repositories; a typical one measures about 73.2 × 30 mm and carries around 38 components.

75% use four copper layers or more, and 75% carry an open source license.

The most starred is ESP32-Zip by vintlabs.

Microcontrollers on boards using the AP7215-33YG-13

What boards using the AP7215-33YG-13 are built for

AP7215-33YG-13: common questions

Where can I find a AP7215-33YG-13 reference design?

Each of the 4 boards on this page is a real design using the AP7215-33YG-13. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the AP7215-33YG-13 use?

Most are built on ESP32 (2) and Microchip SAM (2).

How big is a typical board using the AP7215-33YG-13?

The median is 73.2 × 30 mm, and 25% are two-layer designs.

What is the most popular open source board using the AP7215-33YG-13?

By GitHub stars, ESP32-Zip by vintlabs, with 10 stars.

Can I simulate one of these boards using the AP7215-33YG-13 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.