1 open source board using the Arduino_UNO_R3_Shield
Real designs built with the Arduino_UNO_R3_Shield, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RepRapLtdThe Arduino_UNO_R3_Shield in open source designs
The gallery holds 1 open source boards using the Arduino_UNO_R3_Shield from 1 GitHub repository; a typical one measures about 68.6 × 53.3 mm and carries around 34 components.
100% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.
The most starred is Oxygen concentrator by RepRapLtd.
Microcontrollers on boards using the Arduino_UNO_R3_Shield
Arduino_UNO_R3_Shield: common questions
Where can I find a Arduino_UNO_R3_Shield reference design?
Each of the 1 boards on this page is a real design using the Arduino_UNO_R3_Shield. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the Arduino_UNO_R3_Shield use?
Most are built on AVR/Arduino (1).
How big is a typical board using the Arduino_UNO_R3_Shield?
The median is 68.6 × 53.3 mm, and 100% are two-layer designs.
What is the most popular open source board using the Arduino_UNO_R3_Shield?
By GitHub stars, Oxygen concentrator by RepRapLtd, with 83 stars.
Can I simulate one of these boards using the Arduino_UNO_R3_Shield before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.