6 open source boards using the AZ1117CH-3.3TRG1
Real designs built with the AZ1117CH-3.3TRG1, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
FPGARAM2GS
garrettsworkshop
67.3 × 48.5 mm62 parts4LCustom license24
ESP32AiO-i2s-DAC
martinroger
58.8 × 55.8 mm86 parts2LMIT22
NXPRC11-2
AgOpenGPS-Official
159 × 130 mm100 parts4LGPL-3.020
A1S Mini Board
58.8 × 55.8 mm70 parts2LMIT22
ESP32RC14
145 × 108 mm88 parts2LGPL-3.020
Haut de Forme
29.8 × 68.3 mm27 parts2LMIT22
The AZ1117CH-3.3TRG1 in open source designs
The gallery holds 6 open source boards using the AZ1117CH-3.3TRG1 from 3 GitHub repositories; a typical one measures about 63 × 62 mm and carries around 78 components.
67% are two-layer designs, the rest use four layers or more, and 83% carry an open source license.
The most starred is RAM2GS by garrettsworkshop.
What boards using the AZ1117CH-3.3TRG1 are built for
AZ1117CH-3.3TRG1: common questions
Where can I find a AZ1117CH-3.3TRG1 reference design?
Each of the 6 boards on this page is a real design using the AZ1117CH-3.3TRG1. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the AZ1117CH-3.3TRG1 use?
Most are built on ESP32 (2), FPGA (1) and NXP (1).
How big is a typical board using the AZ1117CH-3.3TRG1?
The median is 63 × 62 mm, and 67% are two-layer designs.
What is the most popular open source board using the AZ1117CH-3.3TRG1?
By GitHub stars, RAM2GS by garrettsworkshop, with 24 stars.
Can I simulate one of these boards using the AZ1117CH-3.3TRG1 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.