HardLabs

6 open source boards using the BQ25100

Real designs built with the BQ25100, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

6 boardsClear filtersOpen license only|Most starredRecently updatedMost components

The BQ25100 in open source designs

The gallery holds 6 open source boards using the BQ25100 from 6 GitHub repositories; a typical one measures about 21 × 17.8 mm and carries around 79 components.

100% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.

The most starred is Seeed Studio XIAO nRF52840 v1.3 by Josephrp.

Parts used alongside the BQ25100

Microcontrollers on boards using the BQ25100

What boards using the BQ25100 are built for

BQ25100: common questions

Where can I find a BQ25100 reference design?

Each of the 6 boards on this page is a real design using the BQ25100. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the BQ25100 use?

Most are built on Nordic nRF (6).

How big is a typical board using the BQ25100?

The median is 21 × 17.8 mm, and 100% are two-layer designs.

What is the most popular open source board using the BQ25100?

By GitHub stars, Seeed Studio XIAO nRF52840 v1.3 by Josephrp, with 12 stars.

Can I simulate one of these boards using the BQ25100 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part

AMS1117-3.3 544USBLC6-2SC6 454RP2040 377W25Q128JVS 226TL072 210TL074 192AP2112K-3.3 166CH340C 146Pico 134L7805 129SRV05-4 12874LS04 12674HC595 12074LS245 116ESP32-S3-WROOM-1 11274LS00 109ProMicro 107USBLC6-2P6 10674LS138 102AP2112K-3.3TRG1 100W25Q128JVSIQ 9974LS32 96XC6206P332MR 93Arduino_Nano_v3.x 92