16 open source boards using the BQ25100

Real designs built with the BQ25100, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

16 boardsClear filters|Most starred

How designs wire the BQ25100

Read from the KiCad layouts of 15 open source designs, one per repository: what each pin of the BQ25100 connects to, and the resistors, capacitors and other passives placed on it.

  • Pin A1 has a decoupling capacitor on 15 of 15 designs, most often 2.2 µF.
  • Pin A2 has a decoupling capacitor on 15 of 15 designs, most often 2.2 µF.
  • Pin B1 has a resistor to GND on 15 of 15 designs, most often 10 kΩ.
  • Pin B2 has a resistor to GND on 15 of 15 designs, most often 2.7 kΩ.
Pin A1Connected to: VBAT 100%
  • Decoupling capacitor on 100% · 2.2 µF (15)
Pin A2Connected to: VBUS 100%
  • Decoupling capacitor on 100% · 2.2 µF (30)
Pin B1Connected to: Signal 100%
  • Resistor to GND on 100% · 10 kΩ (15)
Pin B2Connected to: Signal 100%
  • Resistor to GND on 100% · 2.7 kΩ (15)
  • Series resistor on 100% · 2.7 kΩ (15)
Pin C2Connected to: GND 100%

1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Seeed Studio XIAO nRF52840 v1.3 by Josephrp, Seeed Studio XIAO nRF52840 v1.3 by dhirptl, Seeed Studio XIAO nRF52840 v1.3 by Videocraft10 and Seeed Studio XIAO nRF52840 v1.3 by feastorg.

The BQ25100 in open source designs

The gallery holds 16 open source boards using the BQ25100 from 16 GitHub repositories; a typical one measures about 21 × 17.8 mm and carries around 79 components.

100% are two-layer designs, the rest use four layers or more, and 38% carry an open source license.

The most starred is Seeed Studio XIAO nRF52840 v1.3 by Josephrp.

Parts used alongside the BQ25100

Microcontrollers on boards using the BQ25100

BQ25100: common questions

Where can I find a BQ25100 reference design?

Each of the 16 boards on this page is a real design using the BQ25100. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the BQ25100 pin A1?

Pin A1 has a decoupling capacitor on 15 of 15 designs, most often 2.2 µF. Counted from the KiCad layouts of 15 open source designs using the BQ25100.

What decoupling capacitors do designs use on the BQ25100 pin A2?

Pin A2 has a decoupling capacitor on 15 of 15 designs, most often 2.2 µF. Counted from the KiCad layouts of 15 open source designs using the BQ25100.

What resistor goes on the BQ25100 pin B1?

Pin B1 has a resistor to GND on 15 of 15 designs, most often 10 kΩ. Counted from the KiCad layouts of 15 open source designs using the BQ25100.

Which microcontrollers do boards using the BQ25100 use?

Most are built on Nordic nRF (16).

How big is a typical board using the BQ25100?

The median is 21 × 17.8 mm, and 100% are two-layer designs.

What is the most popular open source board using the BQ25100?

By GitHub stars, Seeed Studio XIAO nRF52840 v1.3 by Josephrp, with 12 stars.

Can I simulate one of these boards using the BQ25100 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part