2 open source boards using the CPC1018N
Real designs built with the CPC1018N, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/ArduinoSmu main 1
jaromir-sukuba
130 × 80 mm206 parts2LNo license188
STM32GuitarPedalSTM32
GuitarML
60 × 95 mm101 parts4LMIT7
The CPC1018N in open source designs
The gallery holds 2 open source boards using the CPC1018N from 2 GitHub repositories; a typical one measures about 95 × 87.5 mm and carries around 154 components.
50% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.
The most starred is Smu main 1 by jaromir-sukuba.
Microcontrollers on boards using the CPC1018N
What boards using the CPC1018N are built for
CPC1018N: common questions
Where can I find a CPC1018N reference design?
Each of the 2 boards on this page is a real design using the CPC1018N. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the CPC1018N use?
Most are built on AVR/Arduino (1) and STM32 (1).
How big is a typical board using the CPC1018N?
The median is 95 × 87.5 mm, and 50% are two-layer designs.
What is the most popular open source board using the CPC1018N?
By GitHub stars, Smu main 1 by jaromir-sukuba, with 188 stars.
Can I simulate one of these boards using the CPC1018N before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.