6 open source boards using the ICM-42670-P
Real designs built with the ICM-42670-P, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32Esp rust board
esp-rs
22.9 × 63.5 mm48 parts2LNo license647
RP2040/RP2350Dev real
iamdarshg
105 × 105 mm310 parts4LNo license1
ESP32FreeEEG
eric5512
64 × 46.1 mm94 parts4LMIT1
Sensor Board
ElectronicCats
83 × 83 mm51 parts4LNo license35
RP2040/RP2350Dev real production
105 × 105 mm310 parts4LNo license1
RP2040/RP2350Dev board
100 × 50 mm172 parts4LNo license1
The ICM-42670-P in open source designs
The gallery holds 6 open source boards using the ICM-42670-P from 4 GitHub repositories; a typical one measures about 91.5 × 73.3 mm and carries around 133 components.
83% use four copper layers or more, and 17% carry an open source license.
The most starred is Esp rust board by esp-rs.
Microcontrollers on boards using the ICM-42670-P
What boards using the ICM-42670-P are built for
ICM-42670-P: common questions
Where can I find a ICM-42670-P reference design?
Each of the 6 boards on this page is a real design using the ICM-42670-P. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the ICM-42670-P use?
Most are built on RP2040/RP2350 (3) and ESP32 (2).
How big is a typical board using the ICM-42670-P?
The median is 91.5 × 73.3 mm, and 17% are two-layer designs.
What is the most popular open source board using the ICM-42670-P?
By GitHub stars, Esp rust board by esp-rs, with 647 stars.
Can I simulate one of these boards using the ICM-42670-P before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.