4 open source boards using the INA180A4
Real designs built with the INA180A4, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32Djinn
tzarc
192.3 × 150.5 mm216 parts2LCERN-OHL-S-2.0988- schematic only · 78 parts
Autonomous-Solar-Light
nguyenduc-03
78 partsNo license1 
STM32Ghoul
228.6 × 79.4 mm163 parts2LCERN-OHL-S-2.0988
STM32Kobold
76 × 75.1 mm94 parts4LCERN-OHL-S-2.0988
The INA180A4 in open source designs
The gallery holds 4 open source boards using the INA180A4 from 2 GitHub repositories; a typical one measures about 192.3 × 79.4 mm and carries around 129 components.
67% are two-layer designs, the rest use four layers or more, and 75% carry an open source license.
The most starred is Djinn by tzarc.
Microcontrollers on boards using the INA180A4
What boards using the INA180A4 are built for
INA180A4: common questions
Where can I find a INA180A4 reference design?
Each of the 4 boards on this page is a real design using the INA180A4. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the INA180A4 use?
Most are built on STM32 (3).
How big is a typical board using the INA180A4?
The median is 192.3 × 79.4 mm, and 67% are two-layer designs.
What is the most popular open source board using the INA180A4?
By GitHub stars, Djinn by tzarc, with 988 stars.
Can I simulate one of these boards using the INA180A4 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.