2 open source boards using the INA233
Real designs built with the INA233, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32Maxwell main
azonenberg
280 × 195 mm987 parts8LBSD-3-Clause193
AR PDM INA233 breakout
align-racing-uia
21.6 × 13.7 mm3 parts2LNo license5
The INA233 in open source designs
The gallery holds 2 open source boards using the INA233 from 2 GitHub repositories; a typical one measures about 150.8 × 104.4 mm and carries around 495 components.
50% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.
The most starred is Maxwell main by azonenberg.
Microcontrollers on boards using the INA233
What boards using the INA233 are built for
INA233: common questions
Where can I find a INA233 reference design?
Each of the 2 boards on this page is a real design using the INA233. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the INA233 use?
Most are built on STM32 (1).
How big is a typical board using the INA233?
The median is 150.8 × 104.4 mm, and 50% are two-layer designs.
What is the most popular open source board using the INA233?
By GitHub stars, Maxwell main by azonenberg, with 193 stars.
Can I simulate one of these boards using the INA233 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.