4 open source boards using the LIS2DE12TR
Real designs built with the LIS2DE12TR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32Rfc tackle sensor
Celnardur
47 × 59.7 mm66 parts4LMIT3
ESP32ESPLionV1
Angus-McIntyre
45 × 35 mm114 parts4LCC-BY-SA-4.00
STM32Tackle sensor hardware
Collegiate-Robotic-Football-Conference
47 × 59.7 mm66 parts4LMIT0
STM32Projected
jonnor
28 × 28 mm43 parts2LNo license43
The LIS2DE12TR in open source designs
The gallery holds 4 open source boards using the LIS2DE12TR from 4 GitHub repositories; a typical one measures about 46 × 47.3 mm and carries around 66 components.
75% use four copper layers or more, and 75% carry an open source license.
The most starred is Projected by jonnor.
Parts used alongside the LIS2DE12TR
What boards using the LIS2DE12TR are built for
LIS2DE12TR: common questions
Where can I find a LIS2DE12TR reference design?
Each of the 4 boards on this page is a real design using the LIS2DE12TR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the LIS2DE12TR?
The LD1117S33TR, LM3488MM/NOPB, STM32G031F8P6 and ULN2003ADR appear in the most repositories here.
Which microcontrollers do boards using the LIS2DE12TR use?
Most are built on STM32 (3) and ESP32 (1).
How big is a typical board using the LIS2DE12TR?
The median is 46 × 47.3 mm, and 25% are two-layer designs.
What is the most popular open source board using the LIS2DE12TR?
By GitHub stars, Projected by jonnor, with 43 stars.
Can I simulate one of these boards using the LIS2DE12TR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.