2 open source boards using the LM2596SX-5.0/NOPB
Real designs built with the LM2596SX-5.0/NOPB, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32Nif-T
SharKingStudios
100 × 100 mm103 parts4LMIT11
Coco salt replacement
qbancoffee
27.6 × 34.3 mm20 parts2LGPL-3.010
The LM2596SX-5.0/NOPB in open source designs
The gallery holds 2 open source boards using the LM2596SX-5.0/NOPB from 2 GitHub repositories; a typical one measures about 63.8 × 67.1 mm and carries around 62 components.
50% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.
The most starred is Nif-T by SharKingStudios.
Microcontrollers on boards using the LM2596SX-5.0/NOPB
What boards using the LM2596SX-5.0/NOPB are built for
LM2596SX-5.0/NOPB: common questions
Where can I find a LM2596SX-5.0/NOPB reference design?
Each of the 2 boards on this page is a real design using the LM2596SX-5.0/NOPB. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the LM2596SX-5.0/NOPB use?
Most are built on ESP32 (1).
How big is a typical board using the LM2596SX-5.0/NOPB?
The median is 63.8 × 67.1 mm, and 50% are two-layer designs.
What is the most popular open source board using the LM2596SX-5.0/NOPB?
By GitHub stars, Nif-T by SharKingStudios, with 11 stars.
Can I simulate one of these boards using the LM2596SX-5.0/NOPB before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.