5 open source boards using the LM3671MF
Real designs built with the LM3671MF, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350Flight computer
linguini1
83.7 × 62.9 mm82 parts4LNo license17
STM32USB-Keyboard
andreili
99.1 × 99.4 mm107 parts4LGPL-3.04
A13 test project
servomouse
80 × 50 mm145 parts4LNo license1
Ground station
65.5 × 32 mm26 parts4LNo license17
A13 test project planar bkp
50 × 50 mm113 parts4LNo license1
The LM3671MF in open source designs
The gallery holds 5 open source boards using the LM3671MF from 3 GitHub repositories; a typical one measures about 80 × 50 mm and carries around 107 components.
100% use four copper layers or more, and 20% carry an open source license.
The most starred is Flight computer by linguini1.
Parts used alongside the LM3671MF
Microcontrollers on boards using the LM3671MF
What boards using the LM3671MF are built for
LM3671MF: common questions
Where can I find a LM3671MF reference design?
Each of the 5 boards on this page is a real design using the LM3671MF. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the LM3671MF use?
Most are built on RP2040/RP2350 (1) and STM32 (1).
How big is a typical board using the LM3671MF?
The median is 80 × 50 mm, and 0% are two-layer designs.
What is the most popular open source board using the LM3671MF?
By GitHub stars, Flight computer by linguini1, with 17 stars.
Can I simulate one of these boards using the LM3671MF before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.