HardLabs

12 open source boards using the LTV-817S-TA1-B

Real designs built with the LTV-817S-TA1-B, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

12 boardsClear filtersOpen license only|Most starredRecently updatedMost components

The LTV-817S-TA1-B in open source designs

The gallery holds 12 open source boards using the LTV-817S-TA1-B from 2 GitHub repositories; a typical one measures about 86 × 145 mm and carries around 197 components.

92% use four copper layers or more, and 0% carry an open source license.

The most starred is GrblHAL-Sender by Jay-Tech.

LTV-817S-TA1-B: common questions

Where can I find a LTV-817S-TA1-B reference design?

Each of the 12 boards on this page is a real design using the LTV-817S-TA1-B. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How big is a typical board using the LTV-817S-TA1-B?

The median is 86 × 145 mm, and 8% are two-layer designs.

What is the most popular open source board using the LTV-817S-TA1-B?

By GitHub stars, GrblHAL-Sender by Jay-Tech, with 8 stars.

Can I simulate one of these boards using the LTV-817S-TA1-B before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part

AMS1117-3.3 345USBLC6-2SC6 296RP2040 224W25Q128JVS 135TL072 118CH340C 116AP2112K-3.3 103ESP32-S3-WROOM-1 97TL074 94AP2112K-3.3TRG1 82SRV05-4 73W25Q128JVSIQ 73USBLC6-2P6 70Pico 52L7805 50XC6206P332MR 50MCP73831T-2ACI/OT 49SN65HVD230 49AMS1117-5.0 48ESP32-S3-WROOM-1-N16R8 48LM393 44BME280 43DW01A 43LAN8710A-EZC(QFN32) 43