7 open source boards using the M24C64-RMN6TP
Real designs built with the M24C64-RMN6TP, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Rp2040 dongle ioboard 4ports isolated
OpenLightingProject
106 × 55 mm55 parts2LApache-2.0128
RP2040/RP2350Fc980c controller
wlhlm
82.3 × 35.5 mm36 parts2LNo license20
STM32Bldc esc
EwoudVV
544 × 768 mm421 parts4LNo license1
STM32Anthracite PCB (Bottom)
trope-oshw
60 × 73.5 mm208 parts4LCERN-OHL-S-2.01
Rp2040 dongle ioboard 4ports unisolated
106 × 55 mm51 parts2LApache-2.0128
Rp2040 dongle ioboard 2ports rdm isolated
106 × 55 mm28 parts2LApache-2.0128
Rp2040 dongle ioboard 2ports rdm unisolated
106 × 55 mm27 parts2LApache-2.0128
The M24C64-RMN6TP in open source designs
The gallery holds 7 open source boards using the M24C64-RMN6TP from 4 GitHub repositories; a typical one measures about 106 × 55 mm and carries around 51 components.
71% are two-layer designs, the rest use four layers or more, and 71% carry an open source license.
The most starred is Rp2040 dongle ioboard 4ports isolated by OpenLightingProject.
Parts used alongside the M24C64-RMN6TP
Microcontrollers on boards using the M24C64-RMN6TP
What boards using the M24C64-RMN6TP are built for
M24C64-RMN6TP: common questions
Where can I find a M24C64-RMN6TP reference design?
Each of the 7 boards on this page is a real design using the M24C64-RMN6TP. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the M24C64-RMN6TP use?
Most are built on STM32 (2) and RP2040/RP2350 (1).
How big is a typical board using the M24C64-RMN6TP?
The median is 106 × 55 mm, and 71% are two-layer designs.
What is the most popular open source board using the M24C64-RMN6TP?
By GitHub stars, Rp2040 dongle ioboard 4ports isolated by OpenLightingProject, with 128 stars.
Can I simulate one of these boards using the M24C64-RMN6TP before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.