10 open source boards using the M24C64-RMN6TP

Real designs built with the M24C64-RMN6TP, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

10 boardsClear filters|Most starred

How designs wire the M24C64-RMN6TP

Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the M24C64-RMN6TP connects to, and the resistors, capacitors and other passives placed on it.

  • The VCC pin has a decoupling capacitor on 5 of 7 designs, most often 100 nF (then 10 nF).
  • The E2_3 pin is tied to GND on 5 of 7 designs (a signal on 2).
  • The SDA_5 pin has a pull-up to 3.3V on 4 of 7 designs, most often 3.3 kΩ (then 4.7 kΩ).
  • The SCL_6 pin has a pull-up to 3.3V on 4 of 7 designs, most often 3.3 kΩ (then 4.7 kΩ).
E2_3pin 3Connected to: GND 71% · a signal 29%
VSS_4pin 4Connected to: GND 100%
SDA_5pin 5Connected to: The microcontroller 71%, M24C64-RMN6TP 29%
  • Pull-up to 3.3V on 57% · 3.3 kΩ (2), 4.7 kΩ (2)
SCL_6pin 6Connected to: The microcontroller 71%, M24C64-RMN6TP 29%
  • Pull-up to 3.3V on 57% · 3.3 kΩ (2), 4.7 kΩ (2)
VCCpin 8Connected to: 3.3V 100%
  • Decoupling capacitor on 71% · 100 nF (8), 10 nF (1), 10 µF (1)

3 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Rp2040 dongle ioboard 2ports rdm isolated by OpenLightingProject, Fc980c controller by wlhlm, Anthracite PCB (Bottom) by trope-oshw and Tangenta by vmetodiev.

The M24C64-RMN6TP in open source designs

The gallery holds 10 open source boards using the M24C64-RMN6TP from 7 GitHub repositories; a typical one measures about 106 × 55 mm and carries around 81 components.

50% are two-layer designs, the rest use four layers or more, and 80% carry an open source license.

The most starred is Rp2040 dongle ioboard 4ports isolated by OpenLightingProject.

Parts used alongside the M24C64-RMN6TP

Microcontrollers on boards using the M24C64-RMN6TP

M24C64-RMN6TP: common questions

Where can I find a M24C64-RMN6TP reference design?

Each of the 10 boards on this page is a real design using the M24C64-RMN6TP. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the M24C64-RMN6TP VCC pin?

The VCC pin has a decoupling capacitor on 5 of 7 designs, most often 100 nF (then 10 nF). Counted from the KiCad layouts of 7 open source designs using the M24C64-RMN6TP.

How is the M24C64-RMN6TP E2_3 pin connected?

The E2_3 pin is tied to GND on 5 of 7 designs (a signal on 2). Counted from the KiCad layouts of 7 open source designs using the M24C64-RMN6TP.

What pull-up resistor is used on the M24C64-RMN6TP SDA_5 pin?

The SDA_5 pin has a pull-up to 3.3V on 4 of 7 designs, most often 3.3 kΩ (then 4.7 kΩ). Counted from the KiCad layouts of 7 open source designs using the M24C64-RMN6TP.

What parts are used alongside the M24C64-RMN6TP?

The USBLC6-2SC6, AMS1117-3.3 and XC6206P332MR-G appear in the most repositories here.

Which microcontrollers do boards using the M24C64-RMN6TP use?

Most are built on STM32 (4) and RP2040/RP2350 (1).

How big is a typical board using the M24C64-RMN6TP?

The median is 106 × 55 mm, and 50% are two-layer designs.

What is the most popular open source board using the M24C64-RMN6TP?

By GitHub stars, Rp2040 dongle ioboard 4ports isolated by OpenLightingProject, with 128 stars.

Can I simulate one of these boards using the M24C64-RMN6TP before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part